Skip to content

OlBuWa wall-mounted glass dispenser, 200 ml, screw fixing

The most completely dimensioned accessory in this catalogue — bottle, bracket, wall plate and ring, all published — and the only screwed dispenser here.

OlBuWa wall-mounted frosted glass soap dispenser in a stainless bracket

OlBuWa wall-mounted glass dispenser, 200 ml, screw fixing

The most completely dimensioned accessory in this catalogue — bottle, bracket, wall plate and ring, all published — and the only screwed dispenser here.

Capacity
200 ml — stated
Pump type
A chrome pump — stated
Foaming
No — a conventional liquid pump
Refill opening
Not stated as a figure — the bottle lifts out of the ring to be refilled
Material
Thick frosted glass bottle in a rustproof stainless steel bracket — stated
Power source
None — hand pump
Amazon reference
B07JNL5V8S (same reference on 6 Amazon marketplaces)
EAN
0764560060354
  • Publishes five dimensions — bottle height and diameter, bracket height, wall plate diameter and ring diameter
  • Screw fixing with screws and plugs supplied, which is permanent in a way adhesive is not
  • 200 ml is the smallest capacity in this hub — refilled often

Best for: A small basin with no ledge at all, in a bathroom where drilling is allowed and the fixing should be permanent.

≈ $20 / £18 / 15 €
Check price on Amazon

Specifications

Capacity
200 ml — stated
Pump type
A chrome pump — stated
Foaming
No — a conventional liquid pump
Refill opening
Not stated as a figure — the bottle lifts out of the ring to be refilled
Material
Thick frosted glass bottle in a rustproof stainless steel bracket — stated
Power source
None — hand pump
Amazon reference
B07JNL5V8S (same reference on 6 Amazon marketplaces)
EAN
0764560060354

What you are getting

A 200 ml thick frosted glass bottle with a chrome pump, held in a rustproof stainless steel wall bracket with a rubber ring, screwed to the wall with the screws and plugs supplied.

Five published dimensions

Bottle: 10 cm high, Ø 6 cm. Bracket: 10.2 cm high. Wall plate: Ø 5.5 cm. Ring: Ø 6.5 cm.

That is more dimensional information than any other accessory in this catalogue provides, and on a wall fitting it is exactly what you need: where the holes go, how far it stands out, and whether a replacement bottle would fit the ring.

Screwed, not stuck

Every other wall-mounted accessory in this hub is adhesive. This one is screwed, with plugs supplied.

That means drilling tile — impossible in most rentals — and it means a fixing that does not care how humid the room gets or how long the pads have been on.

Where to put it

Hold it against the wall and mime pressing the pump before marking anything.

Soap drips from the nozzle. It should drip into the basin, not onto the floor or down the tiles. That is the whole positioning decision and it is easy to get wrong once and permanently.

The rubber ring

The bottle sits in the bracket on a rubber ring: no rattle, no slipping, and no glass-on-steel noise every time it is lifted out.

The trade

200 ml, the smallest here. A completely clear basin ledge, which is the point.

Availability

On sale from 15 € to 20 € on the German, French, Italian and Spanish Amazon stores at the time of checking.

Also on sale on the American and British Amazon stores, in the local currency: the range above is measured on the euro stores only.

Prices and availability are what Keepa reported on the date this page was updated; both move.

Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.

What this fits

All soap dispensers