One hole, 35 mm, and a tail long enough for your worktop · review
A basin mixer that publishes its working height, its connection size and — unusually — that it suits an instantaneous water heater, which decides whether it can be used at all on that kind of supply.
The bottom line The tap you can actually specify: a working height, a connection size, and a supply compatibility. Everything it claims about flow is named rather than numbered.
A chrome single-lever basin mixer with a stated 70 mm clearance under the spout, AirPower aeration, a pop-up rod waste, and G3/8 connections at DN15.
ComfortZone 70. The working clearance between spout and basin, named as a figure. That is what decides whether a hand fits under the tap.
G3/8 at DN15. The connection thread and the nominal bore, so the pipework under your basin can be checked in advance.
Suitable for an instantaneous water heater. Most listings say nothing about this, and it is the compatibility that makes a tap usable or useless on a supply fed by an instantaneous heater.
AirPower. It is a technology name for aeration; it comes with no litres per minute and no pressure such a figure would be measured at. Reported as named.
Parts. Cartridges, aerators and wastes from this manufacturer are sold individually and stay available, which is the difference between repairing a tap and replacing it.
On sale from 46 € to 72 € on the German, French, Italian and Spanish Amazon stores at the time of checking.
Also on sale on the British Amazon store, in the local currency: the range above is measured on the euro stores only.
Listed but with no offer on the American Amazon store — the reference exists there and nobody is currently selling it.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.
| Tap hole diameter | Not stated by the maker — 35 mm is the near-universal single-hole standard |
|---|---|
| Spout reach | Not stated as a figure; the maker states the spout-to-basin clearance as ComfortZone 70 |
| Spout height | 70 mm — stated as ComfortZone 70 |
| Flow rate | AirPower air enrichment stated by name; no litres-per-minute figure and no reference pressure in this listing |
| Cartridge | hansgrohe ceramic mixing system — stated; diameter not given |
| Body material | Not stated by the maker |
| Finish | Chrome — stated |
| Amazon reference | B098JKWZ91 (same reference on 6 Amazon marketplaces) |
| EAN | 4059625316214 |
It means the tap can be used on that kind of supply, which not every mixer can. It is a genuine compatibility statement rather than a feature, and it saves a specific and expensive mistake in kitchens and cloakrooms fed that way.
The maker's name for air enrichment in the stream — an aerator, described as giving a fuller jet that splashes less. It is named without a flow figure, and this site reports the name rather than supplying a number.
Basin mixer · solid brass pop-up rod waste supplied · ceramic cartridge, 500 000 cycles stated
A basin mixer supplied with a solid brass rod waste and a cartridge the maker states has passed 500 000 cycles — the tap on this page that arrives most complete.
Best for: Replacing a tap and a tired waste at the same time, on a basin that has an overflow.
≈ 40 €
Basin mixer · ceramic cartridge · replaceable aerator · two DVGW-tested 50 cm G3/8 hoses · 5-year warranty stated
A chrome basin mixer sold as a complete, tested set: a ceramic cartridge, a replaceable aerator, two certified 50 cm hoses and a five-year manufacturer warranty.
Best for: A shallow inset basin where a flat spout suits, and where certified hoses and a long warranty are worth the premium.
≈ £70 / 75 €
Basin mixer · SUS304 stainless body stated · ceramic cartridge · aerator · matt black
A matt black basin mixer that names its steel and its cartridge — two claims that matter — while publishing none of the dimensions that decide whether it fits.
Best for: A basin where a black finish is wanted over a stainless body, on a standard 35 mm hole.
≈ £29 / 25 €
