Skip to content

Two metres, from a range of nine lengths

VIOKS 200 cm hose, 1/2 in union both ends, 30 to 300 cm range

The long option: two metres of braided hose with the seals already in the nuts, from a range that runs to three metres.

VIOKS stainless braided flexible supply hose, 200 cm

VIOKS 200 cm hose, 1/2 in union both ends, 30 to 300 cm range

The long option: two metres of braided hose with the seals already in the nuts, from a range that runs to three metres.

Length
200 cm — stated; the range runs from 30 cm to 300 cm
End fittings
1/2 in (19.3 mm) union nuts at both ends, with an integrated seal in the union — stated
Inner diameter
Not stated by the maker
Braid material
Not stated as a material — the hose is described as an armoured braided hose
Stated pressure rating
Not stated by the maker
Stated temperature rating
Not stated by the maker
Minimum bend radius
Not stated by the maker
Amazon reference
B07S2WV59S (same reference on 5 Amazon marketplaces)
EAN
4251623937235
  • Two metres, from a range running 30 to 300 cm — the only supply hose here offered in nine lengths
  • The seal is integrated into the union nut, so nothing separate can be forgotten or lost
  • No pressure rating, no temperature rating and no braid material published

Best for: A kitchen or utility connection where the valve is a long way from the tap, or a cistern fed from across a room.

≈ 12 €
Check price on Amazon

Specifications

Length
200 cm — stated; the range runs from 30 cm to 300 cm
End fittings
1/2 in (19.3 mm) union nuts at both ends, with an integrated seal in the union — stated
Inner diameter
Not stated by the maker
Braid material
Not stated as a material — the hose is described as an armoured braided hose
Stated pressure rating
Not stated by the maker
Stated temperature rating
Not stated by the maker
Minimum bend radius
Not stated by the maker
Amazon reference
B07S2WV59S (same reference on 5 Amazon marketplaces)
EAN
4251623937235

What you are getting

A 200 cm armoured flexible supply hose with 1/2 in (19.3 mm) union nuts at both ends, each with a seal integrated into the union. The same hose is offered in lengths from 30 cm to 300 cm.

The range is the reason

Every other supply hose in this hub comes in one length. This one comes in nine, from 30 cm to 3 m.

Buy the shortest that reaches comfortably. Excess hose has to be coiled, and a tight coil inside a cupboard is precisely where a braided hose kinks, work-hardens and eventually splits.

The captive seal

The washer is inside the union nut rather than loose in the bag. It cannot be dropped behind the vanity or left in the packaging, and those are two of the ways this joint ends up weeping.

What this listing does not tell you

No pressure rating. No temperature rating. No braid material.

Two hoses in this hub publish 10 bar, and one publishes it at a stated 20 °C. This one publishes a length and a thread.

For a hose feeding a cistern in a downstairs cloakroom, that may be enough. For a hot supply under pressure, one of the rated hoses in this hub is the better buy.

Availability

On sale from 12 € to 14 € on the German, Italian and Spanish Amazon stores at the time of checking.

Also on sale on the British Amazon store, in the local currency: the range above is measured on the euro stores only.

Listed but with no offer on the French Amazon store — the reference exists there and nobody is currently selling it.

Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.

Prices and availability are what Keepa reported on the date this page was updated; both move.

Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.

What this fits

More flexible supply hoses

  • DELAESI pair of stainless braided supply hoses, 3/8 to 1/2 inch

    DELAESI 50 cm stainless hose pair, 3/8 in to 1/2 in, both female

    A pair of hoses that step from 3/8 in to 1/2 in in the hose itself, which is exactly the joint most people end up adapting.

    Length
    50 cm each, supplied as a pair — stated
    End fittings
    3/8 in female thread at one end and 1/2 in female at the other — stated
    Inner diameter
    Not stated by the maker
    Braid material
    Stainless steel, stated as precision-woven
    Stated pressure rating
    Not stated by the maker
    Stated temperature rating
    0 °C to 90 °C — stated
    Minimum bend radius
    Not stated as a figure — the maker states a kink-resistant design
    Amazon reference
    B0GXPHNPNK (same reference on 4 Amazon marketplaces)
    EAN
    0634881833855
    • Steps between two different threads in one hose, so no adapter and no extra joint is needed
    • Supplied as a pair at 50 cm, which is the length most basins and kitchen sinks actually need
    • No pressure rating at all, on the component whose failure floods a room

    Best for: Connecting a 1/2 in tap tail to a 3/8 in angle valve, or the reverse, without stacking adapters.

    ≈ 10 €
    Check price on Amazon
  • H2O-Flex stainless braided DN8 drinking water supply hose, 2 m

    H2O-Flex 2 m DN8 hose, 8.3 mm bore, 10 bar at 20 °C, made in Germany

    The best-specified supply hose in this catalogue: a bore, a pressure with its temperature, and two named drinking-water approvals.

    Length
    2 m — stated; other lengths available to order
    End fittings
    A 3/8 in union nut at one end and a 3/8 in male thread at the other — stated
    Inner diameter
    8.3 mm, designated DN8 — stated
    Braid material
    Stainless steel 1.4301 over a PE inner hose — stated
    Stated pressure rating
    Up to 10 bar at 20 °C — stated, with the reference temperature
    Stated temperature rating
    Maximum operating temperature 90 °C — stated
    Minimum bend radius
    Not stated by the maker
    Amazon reference
    B00LIZMQX0 (same reference on 5 Amazon marketplaces)
    EAN
    4250991701622
    • The only supply hose in this catalogue to publish an inner diameter — 8.3 mm, DN8
    • States 10 bar AT 20 °C, which is how a pressure rating should be written
    • The dearest supply hose in this hub, by roughly three times

    Best for: A hot supply, a long run, or any installation where the hose should be specified rather than assumed.

    ≈ 23 €
    Check price on Amazon
  • tecuro stainless braided flexible supply hose with a 90 degree bend

    tecuro 300 mm flexible hose with a 90° bend, KTW-A and DVGW W270

    A short certified hose with a right-angle bend, and both a pressure and a temperature rating — which almost no supply hose publishes.

    Length
    300 mm — stated in the maker's own feature list; the title of the same listing says "300 m", which is evidently a typographical error
    End fittings
    Two 3/8 in union nuts (14.95 mm) in nickel-plated brass with a pressed-in seal, one end at 90° — stated
    Inner diameter
    Not stated as a figure — the inner hose is HDPE
    Braid material
    Stainless steel 1.4301 — stated
    Stated pressure rating
    Up to 10 bar — stated
    Stated temperature rating
    −10 °C to 90 °C — stated
    Minimum bend radius
    Not stated by the maker
    Amazon reference
    B00IN0OG68 (same reference on 5 Amazon marketplaces)
    EAN
    4260288371919
    • Publishes a pressure rating AND a temperature range, which most supply hoses do not
    • Certified to KTW-A and DVGW W270 — named drinking-water standards rather than a claim
    • The listing title says "300 m" where its own feature list says 300 mm — read the feature list

    Best for: A short, tight connection behind a pedestal basin where a straight hose would have to curve too sharply.

    ≈ 8 €
    Check price on Amazon

Others worth keeping in the cupboard

  • Brabantia Classic matt steel covered toilet roll holder

    Brabantia Classic covered roll holder, matt steel, screws or tape

    The covered holder that keeps the roll dry, hides its own screws, and offers both mounting methods in one box.

    Mounting method
    Screws or double-sided 3M tape — all fixing materials included, stated
    Cover
    Yes — the cover discreetly shields the roll and stops dust settling, stated
    Spare roll storage
    None
    Material and finish
    Metal in matt steel — stated, from corrosion-resistant materials
    Projection
    Not stated by the maker
    Fixings supplied
    Yes — both screws and adhesive tape, with the fixing point concealed behind the mount, stated
    Amazon reference
    B000MS0WK8 (same reference on 6 Amazon marketplaces)
    EAN
    5051750507139
    • Both mounting methods in one box — screw it or tape it, decided at the wall
    • The fixings are hidden behind the mount, so nothing shows whichever method is used
    • No projection published, on a fitting that sticks out beside a pan

    Best for: A bathroom where the roll gets damp from the shower, and where the wall might be tiled or papered.

    ≈ £11 / 12 €
    Check price on Amazon
  • ECENCE chrome square toilet roll holder with two towel hooks

    ECENCE roll holder plus two towel hooks, 304 stainless, adhesive

    A matching set — roll holder and two hooks — so the whole cloakroom wall arrives finished rather than in three deliveries.

    Mounting method
    Self-adhesive pads, no drilling — stated, on the holder and both hooks
    Cover
    None — an open bar with a curved end
    Spare roll storage
    None — but the two hooks take towels or a spare-roll bag
    Material and finish
    304 stainless steel in a square profile, chrome finish — stated
    Projection
    Not stated by the maker
    Fixings supplied
    Adhesive pads for all three pieces — stated; no screws
    Amazon reference
    B0CHFGNCV1 (same reference on 6 Amazon marketplaces)
    EAN
    4260545437907
    • A matching set of three fittings, so the cloakroom wall is finished in one order and one style
    • The bar end is curved so rolls do not slide off, while still allowing them to be changed easily
    • Adhesive only — no screw option at all

    Best for: A rented cloakroom being fitted out in one go, on smooth tiles, in a single square-edged style.

    ≈ £17 / 22 €
    Check price on Amazon
  • Aikzik stainless steel toilet roll holder with a shelf

    Aikzik roll holder with a shelf, 304 stainless, adhesive or screws

    A roll holder with a shelf on top — for the phone, the wipes and the candle that currently live on the cistern.

    Mounting method
    Adhesive with an extra-large waterproof pad, OR conventional screw fixing — both offered, stated
    Cover
    None — the roll is open, with a shelf above it
    Spare roll storage
    Not as a second bar — the shelf above will hold a spare roll among other things
    Material and finish
    304 stainless steel in silver, with all edges deburred — stated
    Projection
    Not stated by the maker
    Fixings supplied
    Adhesive pad and screws — both, stated
    Amazon reference
    B078TD3R6M (same reference on 6 Amazon marketplaces)
    EAN
    0601263631149
    • A shelf above the roll, which is where a phone, the wipes or a candle actually end up
    • Both mounting methods offered — adhesive for smooth walls, screws for uneven ones
    • No projection and no load figure published — and a shelf invites weight

    Best for: A cloakroom with no windowsill and nowhere to put a phone down.

    ≈ £14 / 13 €
    Check price on Amazon

All flexible supply hoses