Certified, rated, and short on purpose
tecuro 300 mm flexible hose with a 90° bend, KTW-A and DVGW W270
A short certified hose with a right-angle bend, and both a pressure and a temperature rating — which almost no supply hose publishes.
Specifications
- Length
- 300 mm — stated in the maker's own feature list; the title of the same listing says "300 m", which is evidently a typographical error
- End fittings
- Two 3/8 in union nuts (14.95 mm) in nickel-plated brass with a pressed-in seal, one end at 90° — stated
- Inner diameter
- Not stated as a figure — the inner hose is HDPE
- Braid material
- Stainless steel 1.4301 — stated
- Stated pressure rating
- Up to 10 bar — stated
- Stated temperature rating
- −10 °C to 90 °C — stated
- Minimum bend radius
- Not stated by the maker
- Amazon reference
- B00IN0OG68 (same reference on 5 Amazon marketplaces)
- EAN
- 4260288371919
What you are getting
A 300 mm flexible supply hose with an HDPE inner hose and a stainless steel 1.4301 braid, two 3/8 in nickel-plated brass union nuts with pressed-in seals, one end at 90°, rated to 10 bar and from −10 °C to 90 °C, tested to KTW-A and DVGW W270.
Read the length from the feature list, not the title
The title says “300 m”. The maker’s own feature list says “hose length: 300 mm”.
Three hundred metres of hose is not what is in the parcel. The manufacturer contradicts itself and then corrects itself, both within one listing, and this page shows you both rather than quietly picking the sensible one.
Two ratings, which is rare here
10 bar. −10 °C to 90 °C.
A flexible hose is the part that fails and floods a bathroom. Knowing what it is rated for is the difference between a component and a guess, and only one other supply hose in this hub publishes both.
The 90° bend
One end turns a right angle. Behind a pedestal basin, where the valve is close to the wall and the tap tail comes straight down, a straight hose has to curve tightly — and a tight curve is where a braided hose kinks and eventually splits.
A moulded bend removes that.
Measure first
300 mm is short. From your tap tail down to your angle valve, with the bend allowed for. Two hoses in this hub are 500 mm and 2 m.
Availability
On sale from 8 € to 10 € on the German, French, Italian and Spanish Amazon stores at the time of checking.
Also on sale on the British Amazon store, in the local currency: the range above is measured on the euro stores only.
Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.
