Skip to content

Wall-mounted without drilling, guaranteed

Dolvhin adhesive wall dispenser, 250 ml frosted glass, SUS304

A wall dispenser that needs no drill — and whose maker replaces it free for six months if the adhesive lets go.

Dolvhin polished chrome adhesive wall soap dispenser with frosted glass

Dolvhin adhesive wall dispenser, 250 ml frosted glass, SUS304

A wall dispenser that needs no drill — and whose maker replaces it free for six months if the adhesive lets go.

Capacity
250 ml — stated
Pump type
A polished SUS304 stainless steel pump — stated
Foaming
No — a conventional liquid pump
Refill opening
Not stated as a figure — the bottle lifts out of the bracket to be refilled
Material
Frosted white glass bottle in a high-polish SUS304 stainless bracket — stated
Power source
None — hand pump
Amazon reference
B0CFRK4VKW (same reference on 5 Amazon marketplaces)
EAN
4262391910191
  • Wall mounted with a 3M adhesive pad, so no tile is drilled — the rental answer to a clear basin ledge
  • The maker replaces the dispenser free for six months if it falls, which is a real commitment on an adhesive fitting
  • Adhesive needs 24 hours to reach full strength — the maker says so, and a dispenser is heavy when full

Best for: A rented bathroom with smooth tiles, where the basin ledge should be clear and nothing may be drilled.

≈ 28 €
Check price on Amazon

Specifications

Capacity
250 ml — stated
Pump type
A polished SUS304 stainless steel pump — stated
Foaming
No — a conventional liquid pump
Refill opening
Not stated as a figure — the bottle lifts out of the bracket to be refilled
Material
Frosted white glass bottle in a high-polish SUS304 stainless bracket — stated
Power source
None — hand pump
Amazon reference
B0CFRK4VKW (same reference on 5 Amazon marketplaces)
EAN
4262391910191

What you are getting

A 250 ml frosted white glass soap dispenser with a high-polish SUS304 stainless steel pump, held in a matching stainless wall bracket with a textured seating ring, mounted on a 3M adhesive pad.

No drilling, and a promise behind it

Every adhesive fitting in this catalogue asks you to trust a pad. This one is insured: the maker states it will replace the dispenser free of charge for six months if it falls.

That is not a large financial commitment on their part, and it is a real statement about how confident they are — which nothing else here offers.

The 24 hours matters here more than anywhere

A full glass bottle in a steel bracket is the heaviest thing in this catalogue held on by adhesive.

Press the pad. Wait a day. Then fit the bottle.

The maker states full strength after 24 hours on a smooth surface, and this is the one fitting where skipping that is genuinely likely to end on the floor.

Frosted glass, deliberately

It hides the soap level, the fingerprints and the water marks. A clear bottle at eye level on a wall shows all three.

What is not published

Any dimension. The screwed dispenser in this hub publishes five. Here you get a capacity and nothing about how far it stands off the wall — which matters beside a basin you lean over.

Availability

On sale from 28 € to 35 € on the German, French, Italian and Spanish Amazon stores at the time of checking.

Listed but with no offer on the British Amazon store — the reference exists there and nobody is currently selling it.

Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.

Prices and availability are what Keepa reported on the date this page was updated; both move.

Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.

What this fits

More soap dispensers

  • OlBuWa wall-mounted frosted glass soap dispenser in a stainless bracket

    OlBuWa wall-mounted glass dispenser, 200 ml, screw fixing

    The most completely dimensioned accessory in this catalogue — bottle, bracket, wall plate and ring, all published — and the only screwed dispenser here.

    Capacity
    200 ml — stated
    Pump type
    A chrome pump — stated
    Foaming
    No — a conventional liquid pump
    Refill opening
    Not stated as a figure — the bottle lifts out of the ring to be refilled
    Material
    Thick frosted glass bottle in a rustproof stainless steel bracket — stated
    Power source
    None — hand pump
    Amazon reference
    B07JNL5V8S (same reference on 6 Amazon marketplaces)
    EAN
    0764560060354
    • Publishes five dimensions — bottle height and diameter, bracket height, wall plate diameter and ring diameter
    • Screw fixing with screws and plugs supplied, which is permanent in a way adhesive is not
    • 200 ml is the smallest capacity in this hub — refilled often

    Best for: A small basin with no ledge at all, in a bathroom where drilling is allowed and the fixing should be permanent.

    ≈ $20 / £18 / 15 €
    Check price on Amazon
  • Relaxdays concrete grey cast stone soap dispenser

    Relaxdays cast stone dispenser with a stainless pump, 300 ml

    A cast stone dispenser with a steel pump: heavy, matt, and the one here that does not slide across the ledge when you use it.

    Capacity
    About 300 ml — stated
    Pump type
    A stainless steel pump head — stated
    Foaming
    No — a conventional liquid pump
    Refill opening
    Not stated as a figure — the dispenser is refillable
    Material
    Cast stone, in concrete grey — stated
    Power source
    None — hand pump
    Amazon reference
    B08LZDWJ22 (same reference on 6 Amazon marketplaces)
    EAN
    4052025908652
    • A stainless steel pump head rather than plastic, on the part that fails first
    • Cast stone is heavy, so the dispenser stays where it is when the pump is pressed one-handed
    • No dimensions published, on an object that has to sit on a narrow ledge

    Best for: A basin ledge where a light plastic dispenser currently slides away every time it is used.

    ≈ 15 €
    Check price on Amazon
  • WENKO Pure Soap grey glass soap dispenser

    WENKO Pure Soap glass dispenser, 550 ml, 9.5 × 20 × 6 cm

    The largest dispenser in this catalogue at 550 ml, in glass, with its footprint published so it can be checked against the basin.

    Capacity
    550 ml — stated
    Pump type
    A plastic pump head — stated; the pump is not described as metal
    Foaming
    No — a conventional liquid pump
    Refill opening
    Not stated as a figure — the dispenser is refillable through the pump neck
    Material
    Glass body with a plastic dosing head — stated
    Power source
    None — hand pump
    Amazon reference
    B08Z893SZD (same reference on 6 Amazon marketplaces)
    EAN
    4008838337868
    • 550 ml, which is roughly double every other dispenser in this hub — refilled a third as often
    • Publishes its full footprint at 9.5 × 20 × 6 cm, so it can be checked against a narrow basin ledge
    • The pump head is plastic where two dispensers in this hub use stainless or chrome

    Best for: A family bathroom or a kitchen where the dispenser is refilled constantly and 550 ml is genuinely useful.

    ≈ 7 €
    Check price on Amazon

Others worth keeping in the cupboard

  • H2O-Flex stainless braided DN8 drinking water supply hose, 2 m

    H2O-Flex 2 m DN8 hose, 8.3 mm bore, 10 bar at 20 °C, made in Germany

    The best-specified supply hose in this catalogue: a bore, a pressure with its temperature, and two named drinking-water approvals.

    Length
    2 m — stated; other lengths available to order
    End fittings
    A 3/8 in union nut at one end and a 3/8 in male thread at the other — stated
    Inner diameter
    8.3 mm, designated DN8 — stated
    Braid material
    Stainless steel 1.4301 over a PE inner hose — stated
    Stated pressure rating
    Up to 10 bar at 20 °C — stated, with the reference temperature
    Stated temperature rating
    Maximum operating temperature 90 °C — stated
    Minimum bend radius
    Not stated by the maker
    Amazon reference
    B00LIZMQX0 (same reference on 5 Amazon marketplaces)
    EAN
    4250991701622
    • The only supply hose in this catalogue to publish an inner diameter — 8.3 mm, DN8
    • States 10 bar AT 20 °C, which is how a pressure rating should be written
    • The dearest supply hose in this hub, by roughly three times

    Best for: A hot supply, a long run, or any installation where the hose should be specified rather than assumed.

    ≈ 23 €
    Check price on Amazon
  • tecuro stainless braided flexible supply hose with a 90 degree bend

    tecuro 300 mm flexible hose with a 90° bend, KTW-A and DVGW W270

    A short certified hose with a right-angle bend, and both a pressure and a temperature rating — which almost no supply hose publishes.

    Length
    300 mm — stated in the maker's own feature list; the title of the same listing says "300 m", which is evidently a typographical error
    End fittings
    Two 3/8 in union nuts (14.95 mm) in nickel-plated brass with a pressed-in seal, one end at 90° — stated
    Inner diameter
    Not stated as a figure — the inner hose is HDPE
    Braid material
    Stainless steel 1.4301 — stated
    Stated pressure rating
    Up to 10 bar — stated
    Stated temperature rating
    −10 °C to 90 °C — stated
    Minimum bend radius
    Not stated by the maker
    Amazon reference
    B00IN0OG68 (same reference on 5 Amazon marketplaces)
    EAN
    4260288371919
    • Publishes a pressure rating AND a temperature range, which most supply hoses do not
    • Certified to KTW-A and DVGW W270 — named drinking-water standards rather than a claim
    • The listing title says "300 m" where its own feature list says 300 mm — read the feature list

    Best for: A short, tight connection behind a pedestal basin where a straight hose would have to curve too sharply.

    ≈ 8 €
    Check price on Amazon
  • VIOKS stainless braided flexible supply hose, 200 cm

    VIOKS 200 cm hose, 1/2 in union both ends, 30 to 300 cm range

    The long option: two metres of braided hose with the seals already in the nuts, from a range that runs to three metres.

    Length
    200 cm — stated; the range runs from 30 cm to 300 cm
    End fittings
    1/2 in (19.3 mm) union nuts at both ends, with an integrated seal in the union — stated
    Inner diameter
    Not stated by the maker
    Braid material
    Not stated as a material — the hose is described as an armoured braided hose
    Stated pressure rating
    Not stated by the maker
    Stated temperature rating
    Not stated by the maker
    Minimum bend radius
    Not stated by the maker
    Amazon reference
    B07S2WV59S (same reference on 5 Amazon marketplaces)
    EAN
    4251623937235
    • Two metres, from a range running 30 to 300 cm — the only supply hose here offered in nine lengths
    • The seal is integrated into the union nut, so nothing separate can be forgotten or lost
    • No pressure rating, no temperature rating and no braid material published

    Best for: A kitchen or utility connection where the valve is a long way from the tap, or a cistern fed from across a room.

    ≈ 12 €
    Check price on Amazon

All soap dispensers