Skip to content

COOLUCK ten M24 aerators with 304 stainless mesh and a fitting key

A ten-pack with the fitting key included — the sensible way to do every tap in a house in one afternoon.

COOLUCK ten-pack of M24 tap aerators with a fitting key

COOLUCK ten M24 aerators with 304 stainless mesh and a fitting key

A ten-pack with the fitting key included — the sensible way to do every tap in a house in one afternoon.

Thread size
M24 — stated
Thread gender
Not stated explicitly — M24 aerators are the size fitted to taps with an internal thread
Flow rate
12 to 15 l/min — stated by the maker, with measurement error and pressure differences acknowledged but no reference pressure given
Seal type
Ten seals supplied — stated; the material is not named
Material
A chrome-plated brass body with a 304 stainless steel filter mesh — stated
Quantity supplied
Ten, with ten seals and one chrome-plated carbon steel fitting key — stated
Amazon reference
B08R9TN55J (same reference on 5 Amazon marketplaces)
EAN
0762716221109
  • Ten aerators, ten seals and a fitting key, which is a whole house done in one order
  • A chrome-plated brass body and a 304 stainless mesh, both named
  • 12 to 15 l/min is high — this is a full-flow aerator, not a water-saving one

Best for: Renewing every aerator in a house at once, where full flow matters more than a saving.

≈ 9 €
Check price on Amazon

Specifications

Thread size
M24 — stated
Thread gender
Not stated explicitly — M24 aerators are the size fitted to taps with an internal thread
Flow rate
12 to 15 l/min — stated by the maker, with measurement error and pressure differences acknowledged but no reference pressure given
Seal type
Ten seals supplied — stated; the material is not named
Material
A chrome-plated brass body with a 304 stainless steel filter mesh — stated
Quantity supplied
Ten, with ten seals and one chrome-plated carbon steel fitting key — stated
Amazon reference
B08R9TN55J (same reference on 5 Amazon marketplaces)
EAN
0762716221109

What you are getting

Ten M24 tap aerators with chrome-plated brass bodies and 304 stainless steel filter mesh, ten seals, and one chrome-plated carbon steel fitting key. Stated flow of 12 to 15 l/min.

Ten is the right quantity

An aerator is a consumable. In hard water it scales up, the stream goes weak and skewed, and everybody lives with it because replacing one feels like too small a job to bother with.

A ten-pack and a key turns that into one afternoon and every tap in the house.

Read the flow figure carefully

12 to 15 l/min. That is a full-flow aerator: it aerates and filters without restricting.

If your goal is a lower water bill, this is the wrong part — one aerator in this hub runs at about 5.7 l/min. If your goal is filling a pan quickly, this is exactly right.

The maker states its own figure with a caveat about measurement error and pressure differences, which is honest — and it still does not give the pressure it was measured at.

The key is not an accessory

A scaled-in aerator does not unscrew by hand. Without the key it is pliers on a chrome edge, and that edge never looks right again.

Availability

On sale at around 9 € on the German Amazon store at the time of checking.

Listed but with no offer on the British, French, Italian and Spanish Amazon stores — the reference exists there and nobody is currently selling it.

Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.

Prices and availability are what Keepa reported on the date this page was updated; both move.

Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.

What this fits

All tap aerators and cartridges