Skip to content

Bächlein matt black quarter-turn angle valve pair, CW617N brass

The only angle valve here that names its brass alloy and closes in a quarter turn — with the cone nut for rigid pipe already in the box.

Bächlein pair of matt black quarter-turn angle valves

Bächlein matt black quarter-turn angle valve pair, CW617N brass

The only angle valve here that names its brass alloy and closes in a quarter turn — with the cone nut for rigid pipe already in the box.

Inlet thread
1/2 in — stated
Outlet thread
Not stated as a figure — a cone nut is supplied so rigid pipe can be used as well as flexible drinking-water hoses
Handle type
Quarter-turn — opens and closes in a quarter turn, stated
Filter fitted
Not stated by the maker
Body material
CW617N brass, stated as laboratory-tested, in a matt black finish
Outlets
One per valve — supplied as a pair
Amazon reference
B08XWGKS34 (same reference on 5 Amazon marketplaces)
EAN
4744999670368
  • Names the alloy — CW617N — rather than saying "brass", and states that it is laboratory-tested for drinking water
  • A quarter turn from fully open to fully shut, which matters when something is leaking
  • The outlet thread is not published as a figure, unlike the three valves below it here

Best for: A matt black bathroom scheme, or any installation where the valve has to close fast and take rigid pipe.

≈ 19 €
Check price on Amazon

Specifications

Inlet thread
1/2 in — stated
Outlet thread
Not stated as a figure — a cone nut is supplied so rigid pipe can be used as well as flexible drinking-water hoses
Handle type
Quarter-turn — opens and closes in a quarter turn, stated
Filter fitted
Not stated by the maker
Body material
CW617N brass, stated as laboratory-tested, in a matt black finish
Outlets
One per valve — supplied as a pair
Amazon reference
B08XWGKS34 (same reference on 5 Amazon marketplaces)
EAN
4744999670368

What you are getting

Two matt black angle valves in CW617N brass, stated as laboratory-tested, with 1/2 in connections, a quarter-turn action, PTFE tape and a cone nut supplied, and a five-year manufacturer warranty.

The alloy, named

CW617N.

Every other valve here says “brass” or “stainless steel”. CW617N is the standard machining brass used for drinking-water fittings, and naming it — with a statement that it has been laboratory-tested — is a claim about the metal in contact with what you drink.

A quarter turn is not a convenience

You reach for an angle valve when something has gone wrong: a hose has failed, a cartridge is pouring, there is water on the floor.

A quarter turn from open to shut, in one movement. A rotary valve takes five or six turns while you count them. That is the entire case for the quarter-turn design, and it is worth the few euros’ difference.

The cone nut in the box

Old installations use rigid copper pipe to the tap; new ones use a flexible hose. The supplied cone nut lets this valve take either, which means it fits a 1970s bathroom as well as a new one.

What is not published

The outlet thread as a figure. Three valves in this hub state 3/8 in explicitly. Here it is implied by the fittings supplied rather than stated — check against your tap hose before ordering.

A filter, as everywhere in this hub.

Availability

On sale from 19 € to 21 € on the German, French, Italian and Spanish Amazon stores at the time of checking.

Also on sale on the British Amazon store, in the local currency: the range above is measured on the euro stores only.

Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.

Prices and availability are what Keepa reported on the date this page was updated; both move.

Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.

What this fits

All angle valves