Skip to content

Mannesmann 250 mm water pump pliers, through-going joint, 0.37 kg

The cheapest tool in this catalogue, and it still has the joint construction that matters — through-going rather than lapped.

Brüder Mannesmann 250 mm water pump pliers

Mannesmann 250 mm water pump pliers, through-going joint, 0.37 kg

The cheapest tool in this catalogue, and it still has the joint construction that matters — through-going rather than lapped.

Jaw capacity
Not stated as a figure — the jaw opening is adjustable
Overall length
250 mm (10 in) — stated, at a weight of 0.37 kg
Adjustment
A through-going joint with an adjustable jaw opening — stated
Jaw type
Non-slip gripping faces — stated; the tooth pattern is not described
Steel and finish
Not stated as a steel — the handles are painted and stated as non-slip
Amazon reference
B00503I54A (same reference on 6 Amazon marketplaces)
EAN
4003315500759
  • A through-going joint, which is the construction that resists spreading under load
  • Publishes both length and weight — 250 mm at 0.37 kg
  • No jaw capacity published, so the largest nut it will take is unknown

Best for: A toolbox that needs a pair of pliers for the rare occasion, at a price where losing them does not matter.

≈ 3 €
Check price on Amazon

Specifications

Jaw capacity
Not stated as a figure — the jaw opening is adjustable
Overall length
250 mm (10 in) — stated, at a weight of 0.37 kg
Adjustment
A through-going joint with an adjustable jaw opening — stated
Jaw type
Non-slip gripping faces — stated; the tooth pattern is not described
Steel and finish
Not stated as a steel — the handles are painted and stated as non-slip
Amazon reference
B00503I54A (same reference on 6 Amazon marketplaces)
EAN
4003315500759

What you are getting

A 250 mm (10 in) water pump pliers weighing 0.37 kg, with a through-going joint, an adjustable jaw opening and painted non-slip handles.

The joint is the whole review

Through-going. The pivot passes through both handles rather than the two halves being lapped over one another.

Lean hard on a lapped-joint pliers and it spreads: the jaws open, the tool jumps off the nut, and your knuckles find the wall. A through-going joint resists that.

At under three euros this is the cheapest tool in the catalogue, and it has the construction that matters.

Two published figures

250 mm and 0.37 kg. Length is reach and leverage; weight is what your hand notices over an afternoon. Both stated, which several dearer listings do not manage.

What is not published

Jaw capacity. The single most useful number on a pliers — how big a nut it takes. Three tools in this hub give it.

The steel. Not named. The three tools above it here name chrome-vanadium or hardened carbon steel.

Where the money went

Not into the handles. Painted, not moulded — which is fine dry and slippery when wet or oily.

Availability

On sale at around 3 € on the German Amazon store at the time of checking.

Also on sale on the American and British Amazon stores, in the local currency: the range above is measured on the euro stores only.

The French, Italian and Spanish Amazon listings are priced above 1.6× the cheapest store, which is normally a reshipping offer rather than a local price; they are left out of the range above.

Prices and availability are what Keepa reported on the date this page was updated; both move.

Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.

What this fits

All plumbing hand tools