An open spout is louder, wetter, and harder to descale · review
A chrome waterfall mixer sold as a complete set with certified hoses and a five-year warranty, from a range better known for the parts under the basin.
The bottom line Bought as part of a set rather than on its numbers. Within this hub it is the design choice, and the one whose fall height you cannot check in advance.
A chrome single-lever mixer with an open waterfall spout, a ceramic cartridge, 50 cm G3/8 hoses, a full fixing set and a stated five-year warranty.
Coherence. A tap, a pop-up waste and a bottle trap from one range match in finish and in specification, and everything visible under a wall-hung basin is part of the room.
No published drop height, on a design whose whole behaviour depends on it. Every other waterfall tap on this page publishes at least that, and two of them cost half as much.
Its wastes state whether they are slotted or unslotted, and its traps publish a water seal depth. Both are the specifications that matter in those families, and a maker who publishes them there is a reasonable bet here.
On sale at around 75 € on the German, French, Italian and Spanish Amazon stores at the time of checking.
Also on sale on the British Amazon store, in the local currency: the range above is measured on the euro stores only.
Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.
| Spout width | Not stated as a figure — the maker describes the stream as wide |
|---|---|
| Spout drop | Not stated by the maker |
| Aerator or flat screen | Open waterfall spout — stated |
| Flow rate | Not stated by the maker |
| Cartridge | Ceramic cartridge — stated; diameter not given |
| Body material | Not stated by the maker |
| Amazon reference | B0BLCH13HX (same reference on 5 Amazon marketplaces) |
| EAN | 4744999671167 |
Because the price reflects the design, the warranty and the range rather than a specification sheet. That is a legitimate reason to buy something and a poor reason to compare it, and this page says which is which.
That is its strongest argument. A tap, a pop-up waste and a bottle trap from one range are finished alike and specified alike, which is exactly what a mixed basket is not.
Waterfall basin mixer · stainless steel · 60 mm stated spout height · ceramic disc, 500 000 cycles · two 50 cm G3/8 hoses
A low waterfall mixer in stainless steel with a fingerprint-resistant sealed surface, a 500 000-cycle cartridge figure and its hoses in the box.
Best for: A wide, shallow inset basin where the waterfall look is wanted and the water has a short distance to fall.
≈ 31 €
Waterfall basin mixer · SUS304 and brass · PVD plating · 115 mm stated height · two 60 cm SUS304 hoses
A waterfall mixer with a PVD-plated finish over stainless steel and brass, and the longest supplied hoses in this hub at 60 cm.
Best for: A deep inset basin where the extra height is needed, and where a harder plated finish is worth paying for.
≈ 32 €
Waterfall basin mixer · lead-free nickel-free 304 stainless · 85 mm stated spout height · fits worktops under 30 mm
A waterfall mixer that publishes a height, an alloy condition and — uniquely in this catalogue — the worktop thickness it fits, which is the measurement nobody else states.
Best for: A conventional inset basin with a thin worktop, where a waterfall spout is wanted without the splashing of a tall one.
≈ 32 €
