The height is set by your bowl, not by taste · review
A tall mixer with a metal lever, a hardened chrome finish and a complete box — a pop-up waste, the fixing material and the installation tool.
The bottom line The most complete parcel in the hub: a height, a waste, the fixings and the tool. Read the 30 cm as an overall figure, because a bowl is cleared by the spout.
A tall chrome single-lever mixer stated at 30 cm overall, with a metal lever, a StarLight chrome finish, a pop-up waste, fixing material and a 3-in-1 installation tool.
30 cm is an overall height. It includes the shank below the tap hole. What clears a bowl rim is the clearance above the tap hole, and that is a smaller number the maker does not publish separately here.
The waste — the slotted version, which suits a basin with an overflow — the fixing material, and a tool shaped for the back nut. Between them they remove the two things that most often turn a tap change into an evening.
A metal lever, which is where plastic eventually fails, and a chrome finish the maker states is more resistant to dirt and scratching. Neither is a measurement; both are statements about where the cost went.
On sale from 83 € to 110 € on the French, Italian and Spanish Amazon stores at the time of checking.
Also on sale on the American and British Amazon stores, in the local currency: the range above is measured on the euro stores only.
The German Amazon listing is priced above 1.6× the cheapest store, which is normally a reshipping offer rather than a local price; it is left out of the range above.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.
| Overall height | 30 cm — stated |
|---|---|
| Spout height above the tap hole | Not stated separately from the overall height |
| Spout reach | Not stated by the maker |
| Flow rate | Water-saving stated by the maker; no litres-per-minute figure and no reference pressure |
| Cartridge | Single-lever cartridge — stated; diameter not given |
| Finish | StarLight chrome, stated as more resistant to dirt and scratches |
| Amazon reference | B08WWJRGL1 (same reference on 6 Amazon marketplaces) |
| EAN | 4005176556456 |
It is an overall height and includes the shank below the tap hole, so the clearance above the worktop is less. The maker does not publish the two figures separately, which is worth allowing for when comparing against a bowl rim.
It is the part your hand touches several times a day, and it is where a plastic lever eventually cracks at its pivot. Stating it is a small honesty about where the money went.
Tall basin mixer · ComfortZone 190 mm stated · AirPower aeration · G3/8 DN15 · suitable for instantaneous heaters · no waste supplied
A tall mixer that publishes 190 mm of clearance under the spout, states its connection size, and says it suits an instantaneous water heater — three facts that let it be specified rather than hoped at.
Best for: A countertop bowl whose rim height is known, on a basin that already has its waste.
≈ £100 / 88 €
Tall basin mixer · lead-free 304 stainless stated · spout and body both rotate 360° · ceramic cartridge, 500 000 cycles
A tall chrome mixer in stated lead-free 304 stainless whose body rotates as well as its spout, with a cartridge the maker states has passed 500 000 cycles.
Best for: A bowl reached from two sides, where the extra movement is genuinely used and the rim height is modest.
≈ £51 / 46 €
Tall basin mixer · brass · spout height 8.93 in (about 227 mm) · reach 6 in (about 152 mm) · hole 33–45 mm
The most completely dimensioned tap in this catalogue: a spout height, a spout reach and a tap hole range, all published — in inches, by a maker of antique brass fittings.
Best for: A countertop bowl whose rim height is known, in a bathroom where the finish is period rather than modern.
≈ £36 / 36 €
