Skip to content

Schütte LONDON pull-out kitchen mixer, 298 mm overall, 1500 mm spray hose review

The longest spray hose in this catalogue by a wide margin — 1500 mm, published — on a tap that also states its overall envelope and a replaceable cartridge.

The bottom line Bought for the hose. Nothing else here pulls out 70 cm, and the replaceable cartridge means the tap can be kept. The short tails are the thing to measure first.

What you are getting

A single-lever kitchen mixer in a stainless steel finish, 298 mm tall, with a 1500 mm pull-out spray hose, two DVGW-tested 400 mm connection tails, a fixing triangle and a replaceable ceramic disc cartridge.

The hose is the reason

1500 mm of hose, about 70 cm of usable pull. Everything else in this hub publishes 40 to 45 cm, which covers the sink. Seventy centimetres reaches a bucket on the floor and the far end of the worktop, and that is a different tap to live with.

The word that makes it repairable

“Exchangeable.” The cartridge is stated as replaceable, which is the difference between a drip that costs a few euros and one that costs a new tap. Very few listings on this shelf commit to it.

The energy detail

With the lever centred, only cold water flows — so a quick rinse does not fire the water heater. Stated as designed in rather than as a setting.

What to measure first

The tails are 400 mm. From your tap hole down to your isolating valves. That is the one number on this listing that can make the tap unfittable, and it is published.

Availability

On sale from 71 € to 100 € on the German, French and Spanish Amazon stores at the time of checking.

Also on sale on the British Amazon store, in the local currency: the range above is measured on the euro stores only.

The Italian Amazon listing is priced above 1.6× the cheapest store, which is normally a reshipping offer rather than a local price; it is left out of the range above.

Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.

Prices and availability are what Keepa reported on the date this page was updated; both move.

Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.

What we like, and what we don't

Strengths

  • A 1500 mm spray hose with about 70 cm of usable pull — far more than anything else in this hub
  • States that the ceramic disc cartridge can be exchanged, which is what makes a tap repairable
  • Two DVGW-tested 400 mm tails and a fixing triangle supplied, from a maker with a German service address

Compromises

  • The 400 mm tails are short: under a deep base unit with low valves they will not reach
  • No spray mode count, so whether the head switches patterns at all is unclear
  • Only an overall envelope is published, not the outlet height that clears a pot

Specifications

Hose length1500 mm spray hose — stated; the spray is stated to draw out about 70 cm
Spray modesNot stated by the maker — described as a dish spray
Swivel range360° — stated
Spout height298 mm overall height — stated; the outlet height above the sink is not given separately
Spout reachNot stated as a figure — the maker publishes an overall envelope of 249 × 113 × 298 mm
Tap hole diameterNot stated by the maker — 35 mm is the near-universal single-hole standard
CartridgeCeramic disc cartridge, stated as replaceable when needed
Amazon referenceB00IRLXXBW (same reference on 5 Amazon marketplaces)
EAN4008431797052

Questions people actually ask

What does the middle-position cold start do?

With the lever centred, only cold water flows. On an instantaneous heater that means the heater does not fire for a two-second rinse, which saves energy and reduces wear. The maker states it as a design choice rather than a setting.

Are the 400 mm tails long enough?

Measure from the tap hole down to your isolating valves. Behind a standard sink 400 mm is fine; under a deep base unit with low valves it is not, and extension hoses are cheap but are a second order.