An open spout is louder, wetter, and harder to descale · review
A waterfall mixer with a PVD-plated finish over stainless steel and brass, and the longest supplied hoses in this hub at 60 cm.
The bottom line The best-finished waterfall here and the tallest of the three that publish a height. On a shallow bowl it is the wrong one; on a deep one it is well made.
A single-lever mixer with an ultra-thin open waterfall spout at a stated 115 mm, a body in SUS304 stainless and brass with PVD plating, a ceramic valve core, and two 60 cm SUS304 hoses.
PVD. A vacuum-deposited film, thin and hard, as opposed to a powder or paint coating. It is the more durable of the two families of finish and it is stated rather than implied.
115 mm is nearly twice the fall of the low waterfall tap on this page — comfortable over a deep basin, a nuisance over a shallow one. The sheet is described as ultra-thin, which helps; the width is not published, which is the other half of the answer.
60 cm, in stainless steel, at the standard 3/8 in thread. That is the longest supplied pair in this hub, and it matters under a deep worktop where 50 cm hoses fall short.
On sale from 32 € to 47 € on the German, French and Spanish Amazon stores at the time of checking.
The Italian Amazon listing is priced above 1.6× the cheapest store, which is normally a reshipping offer rather than a local price; it is left out of the range above.
Not found on the American and British Amazon stores, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.
| Spout width | Not stated by the maker — the spout is described as ultra-thin |
|---|---|
| Spout drop | 115 mm of height above the tap hole — stated |
| Aerator or flat screen | Open ultra-thin waterfall spout — stated |
| Flow rate | Not stated by the maker |
| Cartridge | Ceramic valve core — stated; diameter not given |
| Body material | SUS304 stainless steel and brass, with PVD electroplating — stated |
| Amazon reference | B09L81H7B8 (same reference on 4 Amazon marketplaces) |
| EAN | 0777989762853 |
Physical vapour deposition — a thin, hard film applied in a vacuum, as distinct from a powder or paint coating. It resists wear better, and makers who use it state it because it costs more.
It splashes more, all else equal, because the sheet falls further. Whether that matters depends on the bowl: a deep basin absorbs it, a shallow one throws it onto the worktop.
Waterfall basin mixer · ceramic cartridge · G3/8 50 cm hoses · 5-year warranty stated
A chrome waterfall mixer sold as a complete set with certified hoses and a five-year warranty, from a range better known for the parts under the basin.
Best for: Someone buying the whole basin — tap, waste and trap — from one range, and choosing on appearance.
≈ £70 / 75 €
Waterfall basin mixer · stainless steel · 60 mm stated spout height · ceramic disc, 500 000 cycles · two 50 cm G3/8 hoses
A low waterfall mixer in stainless steel with a fingerprint-resistant sealed surface, a 500 000-cycle cartridge figure and its hoses in the box.
Best for: A wide, shallow inset basin where the waterfall look is wanted and the water has a short distance to fall.
≈ 31 €
Waterfall basin mixer · lead-free nickel-free 304 stainless · 85 mm stated spout height · fits worktops under 30 mm
A waterfall mixer that publishes a height, an alloy condition and — uniquely in this catalogue — the worktop thickness it fits, which is the measurement nobody else states.
Best for: A conventional inset basin with a thin worktop, where a waterfall spout is wanted without the splashing of a tall one.
≈ 32 €
