An open spout is louder, wetter, and harder to descale · review
A low waterfall mixer in stainless steel with a fingerprint-resistant sealed surface, a 500 000-cycle cartridge figure and its hoses in the box.
The bottom line The sensible waterfall: low, stainless, complete in the box, with a cartridge figure attached. What it does not tell you is how wide the sheet is.
A stainless steel single-lever mixer with an open waterfall spout at a stated 60 mm above the tap hole, a ceramic disc cartridge rated at 500 000 cycles, and two 50 cm G3/8 hoses.
An open spout drops a flat sheet rather than a jet. The further it falls, the more it splashes — so on this design the low height is a feature, and it is the reason to prefer this over a tall waterfall on a shallow bowl.
An oil-sealed finish, stated as resisting fingerprints and water marks. On an open spout, where the surface is permanently visible and permanently wet, that is a more useful claim than it would be on a conventional tap.
Deposit forms on the open lip where it can be seen. Wiping after use is the maintenance; check the maker’s instructions before anything acidic.
On sale from 31 € to 40 € on the German and Italian Amazon stores at the time of checking.
Not found on the American, British, French and Spanish Amazon stores, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.
| Spout width | Not stated by the maker |
|---|---|
| Spout drop | 60 mm of spout height above the tap hole — stated |
| Aerator or flat screen | Open waterfall spout — the maker states it reduces splashing and regulates the flow |
| Flow rate | Not stated by the maker — a water saving is claimed without a figure |
| Cartridge | Ceramic disc cartridge, stated to have passed 500 000 cycles; diameter not given |
| Body material | Stainless steel — stated, with an oil-sealed fingerprint-resistant surface |
| Amazon reference | B0F8RF87WY (same reference on 2 Amazon marketplaces) |
| EAN | 0747558752837 |
They can. A flat sheet is wider than a jet and usually unaerated, so it carries more energy to the bowl. Drop height decides it, which is why a low spout is the sensible version of this design.
From a tap hole down to isolating valves behind a standard basin, comfortably. Under a thick worktop with low valves they are not, and extensions are a second order.
Waterfall basin mixer · ceramic cartridge · G3/8 50 cm hoses · 5-year warranty stated
A chrome waterfall mixer sold as a complete set with certified hoses and a five-year warranty, from a range better known for the parts under the basin.
Best for: Someone buying the whole basin — tap, waste and trap — from one range, and choosing on appearance.
≈ £70 / 75 €
Waterfall basin mixer · SUS304 and brass · PVD plating · 115 mm stated height · two 60 cm SUS304 hoses
A waterfall mixer with a PVD-plated finish over stainless steel and brass, and the longest supplied hoses in this hub at 60 cm.
Best for: A deep inset basin where the extra height is needed, and where a harder plated finish is worth paying for.
≈ 32 €
Waterfall basin mixer · lead-free nickel-free 304 stainless · 85 mm stated spout height · fits worktops under 30 mm
A waterfall mixer that publishes a height, an alloy condition and — uniquely in this catalogue — the worktop thickness it fits, which is the measurement nobody else states.
Best for: A conventional inset basin with a thin worktop, where a waterfall spout is wanted without the splashing of a tall one.
≈ 32 €
