The height is set by your bowl, not by taste · review
A tall antique brass mixer that publishes its height, its reach, its hole range and its alloy — and is the tallest spout on this page by a clear margin.
The bottom line The tallest properly dimensioned tap here. Buy it for a high-rimmed bowl, and expect the fall that comes with 244 mm.
A tall basin mixer in vintage brass over a stated 59 brass body, published at 12 in overall (about 305 mm), 9.6 in of spout height (about 244 mm) and 6.3 in of reach (about 160 mm), with a 3/8 in connection.
About 244 mm above the tap hole. That is the tallest on this page, and it exists for a deep bowl with a high rim. On a shallow bowl the extra height is not a bonus: water falls further, and splashing rises with it.
Naming 59 brass rather than “brass” says the body is machined from a known alloy. It matters at the threads, which is where a cast zinc body fails.
Rim height of your bowl plus a few centimetres. Everything else here is published, which makes this one of the few taps in the catalogue you can specify entirely before ordering.
On sale from 41 € to 53 € on the German, French, Italian and Spanish Amazon stores at the time of checking.
Also on sale on the British Amazon store, in the local currency: the range above is measured on the euro stores only.
Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.
| Overall height | 12 in (about 305 mm) — stated in inches by the maker |
|---|---|
| Spout height above the tap hole | 9.6 in (about 244 mm) — stated in inches by the maker |
| Spout reach | 6.3 in (about 160 mm) — stated in inches by the maker |
| Flow rate | Not stated by the maker |
| Cartridge | Single-lever cartridge — stated; type and diameter not given |
| Finish | Vintage brass over an A-standard 59 brass body — stated |
| Amazon reference | B07RX5Y21D (same reference on 5 Amazon marketplaces) |
| EAN | 0722704476157 |
No. It has to clear the rim, and beyond that extra height only increases the fall — and splashing rises with it. Match the height to the bowl rather than buying the tallest available.
A brass alloy designation, reported as the maker states it. It tells you the body is a machined brass rather than a cast zinc alloy, which is what matters at the threads.
Tall basin mixer · ComfortZone 190 mm stated · AirPower aeration · G3/8 DN15 · suitable for instantaneous heaters · no waste supplied
A tall mixer that publishes 190 mm of clearance under the spout, states its connection size, and says it suits an instantaneous water heater — three facts that let it be specified rather than hoped at.
Best for: A countertop bowl whose rim height is known, on a basin that already has its waste.
≈ £100 / 88 €
Tall basin mixer · 30 cm stated overall height · pop-up waste and 3-in-1 tool · metal lever · StarLight chrome
A tall mixer with a metal lever, a hardened chrome finish and a complete box — a pop-up waste, the fixing material and the installation tool.
Best for: A countertop bowl on a basin with an overflow, bought as one parcel rather than as a tap plus two more orders.
≈ 83 €
Tall basin mixer · lead-free 304 stainless stated · spout and body both rotate 360° · ceramic cartridge, 500 000 cycles
A tall chrome mixer in stated lead-free 304 stainless whose body rotates as well as its spout, with a cartridge the maker states has passed 500 000 cycles.
Best for: A bowl reached from two sides, where the extra movement is genuinely used and the rim height is modest.
≈ £51 / 46 €
