The height is set by your bowl, not by taste · review
The most completely dimensioned tap in this catalogue: a spout height, a spout reach and a tap hole range, all published — in inches, by a maker of antique brass fittings.
The bottom line The best-dimensioned tap in the whole catalogue, from an unexpected place. Convert the inches, measure your bowl, and this is a purchase you can actually specify.
A brass tall basin mixer in an antique finish, with a ceramic disc cartridge and a swivelling spout, published at 13 in overall (about 330 mm), 8.93 in of spout height (about 227 mm) and 6 in of reach (about 152 mm).
Almost every tap in this catalogue publishes one figure at most. This one publishes the height above the tap hole — the number that clears a bowl — and the reach, which decides where the stream lands, and the overall height.
The figures are given in inches. The metric equivalents above are conversions, marked as such; the maker’s own unit is what is reported first.
33 to 45 mm. Wide enough to cover an older 32 mm ceramic as well as the modern 35 mm standard, which removes the commonest fitting problem in this family.
It shows water marks differently from chrome and it dislikes acidic descalers. Wiping after use is the maintenance; nothing stronger is safe without the maker’s own instruction.
On sale from 36 € to 47 € on the German, French, Italian and Spanish Amazon stores at the time of checking.
Also on sale on the British Amazon store, in the local currency: the range above is measured on the euro stores only.
Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.
| Overall height | 13 in (about 330 mm) — stated in inches by the maker |
|---|---|
| Spout height above the tap hole | 8.93 in (about 227 mm) — stated in inches by the maker |
| Spout reach | 6 in (about 152 mm) — stated in inches by the maker |
| Flow rate | Not stated by the maker — the listing mentions a filtered outlet screen |
| Cartridge | Ceramic disc cartridge — stated; diameter not given |
| Finish | Antique brass over a brass body — stated |
| Amazon reference | B07DC9257Q (same reference on 5 Amazon marketplaces) |
| EAN | 0655881130676 |
Measure the rim height of your bowl and allow a few centimetres of clearance. A 150 mm rim leaves comfortable room under a 227 mm spout; a 200 mm rim does not. That arithmetic is only possible because this maker publishes the figure.
It is unusually wide, and it is useful: older ceramics are sometimes drilled at 32 mm where modern ones are 35 mm, and a base that covers the range removes the commonest fitting problem in this family.
Tall basin mixer · ComfortZone 190 mm stated · AirPower aeration · G3/8 DN15 · suitable for instantaneous heaters · no waste supplied
A tall mixer that publishes 190 mm of clearance under the spout, states its connection size, and says it suits an instantaneous water heater — three facts that let it be specified rather than hoped at.
Best for: A countertop bowl whose rim height is known, on a basin that already has its waste.
≈ £100 / 88 €
Tall basin mixer · 30 cm stated overall height · pop-up waste and 3-in-1 tool · metal lever · StarLight chrome
A tall mixer with a metal lever, a hardened chrome finish and a complete box — a pop-up waste, the fixing material and the installation tool.
Best for: A countertop bowl on a basin with an overflow, bought as one parcel rather than as a tap plus two more orders.
≈ 83 €
Tall basin mixer · lead-free 304 stainless stated · spout and body both rotate 360° · ceramic cartridge, 500 000 cycles
A tall chrome mixer in stated lead-free 304 stainless whose body rotates as well as its spout, with a cartridge the maker states has passed 500 000 cycles.
Best for: A bowl reached from two sides, where the extra movement is genuinely used and the rim height is modest.
≈ £51 / 46 €
