Skip to content

XPOtool 250 W macerator, 8.5 m lift, 85 m run, 30–40 dB review

The only macerator in this catalogue that publishes a noise level and explains the trade between lift and distance — 4 m up gives you 30 m across.

The bottom line The most usefully specified pump in the hub for planning a pipe run — and the one that cannot take a toilet.

What you are getting

A compact 250 W macerator with three 40 mm inlets, a 23/28 mm outlet, up to 100 l/min, up to 8.5 m of vertical lift, up to 85 m of horizontal run, an inlet tolerance of 65 °C and a stated 30 to 40 dB.

The worked figure is the reason to read this listing

“4 metres of lift allows up to 30 metres of run.”

Every other macerator here publishes a maximum lift and, sometimes, a maximum run — as though you could have both. You cannot: they trade against each other, and the trade is what decides whether the pipe reaches the stack.

This is the only listing in the catalogue that gives a pair you can design with.

What it cannot do

Take a WC. All three inlets are 40 mm. A toilet needs a 100 mm class connection, and this pump does not have one. It is a shower, bath and basin unit.

The noise figure

30 to 40 dB, the only one in this hub. A macerator sits in the room it serves — behind a panel, under a basin — and runs for thirty seconds every time anything drains. It is a fair question and this is the only maker to answer it.

The temperature limit

65 °C, the lowest here. Fine for a shower and a basin. Not enough for a washing machine, which two other units in this hub explicitly accept.

And the thing no listing says

A macerator is drainage that depends on electricity. In a power cut, nothing connected to it drains.

Availability

On sale from 119 € to 131 € on the German, French, Italian and Spanish Amazon stores at the time of checking.

Listed but with no offer on the American Amazon store — the reference exists there and nobody is currently selling it.

Not found on the British Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.

Prices and availability are what Keepa reported on the date this page was updated; both move.

Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.

What we like, and what we don't

Strengths

  • Publishes lift AND run AND a worked combination — 4 m of lift with 30 m of run — which is how these are actually installed
  • The only macerator here to state a noise level, at 30 to 40 dB
  • States the discharge diameter at 23/28 mm, so the pipe can be bought before the pump arrives

Compromises

  • Three 40 mm inlets only — there is no WC-sized inlet, so this cannot take a toilet
  • 65 °C is the lowest inlet temperature here, which limits what appliances can be connected
  • The smallest motor in this hub at 250 W

Specifications

Stated vertical liftUp to 8.5 metres — stated
Stated horizontal runUp to 85 metres, and a stated 30 metres when lifting 4 metres — stated
InletsThree, all at 40 mm — stated
Maximum inlet temperature65 °C — stated
Discharge diameter23/28 mm — stated
Stated noise level30 to 40 dB — stated
Amazon referenceB0BVC21VTT (same reference on 5 Amazon marketplaces)
EAN4251548137604

Questions people actually ask

Can I connect a toilet to it?

No. The three inlets are all 40 mm, and a WC needs a 100 mm class connection. Two macerators in this hub publish an 89 mm or 100 mm inlet; this one does not, and it is sold for basins, baths and showers.

What does "4 m lift gives 30 m run" mean?

It is the honest version of a performance claim. A pump cannot deliver its maximum lift and its maximum distance at once — every metre up costs you many metres across. Publishing a worked pair is how you design a real pipe run, and this is the only listing here that does it.