The trap has to fit inside it, and often does not · review
A cheap two-door vanity unit whose one real specification is that its trap cut-out has a plastic edge protector — the part that chips first.
The bottom line One genuinely thoughtful detail and no dimensions at all. Get the measurements from the seller before you buy.
A white vanity unit with two hinged doors, one tall internal compartment, and a trap cut-out with an integrated plastic edge protector.
A plastic protector on the trap cut-out.
The cut-out is a raw sawn edge in the back panel, directly behind the waste pipe. It is the part of a bathroom cabinet most likely to get wet and least likely to be seen. Chipboard there swells and never comes back.
Almost no vanity unit mentions it. This one designs for it.
Width. Depth. Height. Material.
A vanity unit exists to fit under a specific basin. Two units in this hub publish all three dimensions; this one publishes none.
Measure your basin and the height of your trap, and get the cabinet’s figures from the seller before ordering.
One tall space rather than a shelf. That suits cleaning bottles and nothing else — everything smaller ends up in a heap. Three units in this hub have a shelf or a drawer.
On sale from 33 € to 40 € on the German, French, Italian and Spanish Amazon stores at the time of checking.
Also on sale on the British Amazon store, in the local currency: the range above is measured on the euro stores only.
Listed but with no offer on the American Amazon store — the reference exists there and nobody is currently selling it.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.
| Width | Not stated by the maker |
|---|---|
| Depth | Not stated by the maker |
| Height | Not stated by the maker |
| Basin included | No — the unit is sold as an under-basin cabinet |
| Storage | One tall compartment behind two hinged doors — stated |
| Cut-out for the trap | Yes, with an integrated plastic edge protector — stated |
| Mounting | Freestanding, assembled from flat pack — stated |
| Amazon reference | B0DFQDC3GW (same reference on 6 Amazon marketplaces) |
| EAN | 4061173262905 |
The trap cut-out is a raw sawn edge in the back of the cabinet, right where the waste pipe is. If a joint ever weeps, that edge is the first thing to get wet, and unprotected chipboard swells permanently. A plastic trim over it is a small piece of sense.
That cannot be answered from this listing — no width, depth or height is given. Measure your basin's outside dimensions and the height of your waste, and ask the seller for the cabinet's figures before ordering.
Vanity unit · 60 × 56 × 34 cm · wood-based board with scratch-resistant surfaces · two doors and one shelf · flat pack with illustrated instructions
The deepest vanity unit in this hub at 34 cm, with scratch-resistant surfaces stated — and no word about the trap cut-out.
Best for: A basin with plenty of room behind it, where depth for towels matters more than a shallow footprint.
≈ 74 €
Vanity unit · 60 W × 59 H × 30 D cm · 16 mm melamine chipboard, some MDF · two doors and a shelf · cut-out for the trap — stated · fittings supplied
A fully dimensioned vanity unit that states its board thickness AND states that it has a cut-out for the trap — the two facts this shelf usually skips.
Best for: A straightforward replacement under an existing basin, where the cabinet must sit flat against the wall.
≈ £105 / 83 €
Vanity unit · 60 × 30 × 60 cm · bamboo · two louvre doors for airflow · shelf adjustable to three heights · magnetic catches
A bamboo vanity unit with louvred doors — the only one here designed to let the cupboard under a basin actually breathe.
Best for: A damp bathroom with no window, where the cupboard under the basin currently smells.
≈ 46 €
