Skip to content

LADOKEE wall-mounted shower thermostat, 150 mm centres, G1/2 review

The cheapest thermostat in this hub, and the one that publishes the most: a centre distance, an inlet and outlet size, a detent temperature and the whole range it will deliver.

The bottom line More published figures than thermostats costing three times as much. What none of them publish — the minimum pressure — is still missing here.

What you are getting

A chrome wall-mounted shower thermostat over solid brass, with hot and cold inlets 150 mm apart at G 1/2, a G 1/2 outlet, a 38 °C detent and a stated output range of 20 to 50 °C.

Four published figures at the bottom of the price list

150 mm centres. G 1/2 in. G 1/2 out. 20 to 50 °C.

That is enough to check the tap against your existing pipework before ordering, which is more than several thermostats here at three times the price manage.

The 38 °C detent is a detent

A mechanical stop the hand feels, released by a button. It stops the handle being turned absent-mindedly into hot water. It is not a scald-prevention device, and where genuine scald prevention is required — a care setting, a nursery — the device that does it is a thermostatic mixing valve specified for the purpose.

The figure nobody on this shelf gives

Minimum operating pressure. A thermostatic cartridge balances hot against cold, and below a certain pressure it cannot hold a temperature. On a gravity-fed system that is the difference between a working shower and one that hunts. This listing does not say, and neither does most of the hub.

Availability

On sale from 34 € to 54 € on the German, French, Italian and Spanish Amazon stores at the time of checking.

Not found on the American and British Amazon stores, where the buy link falls back to a local search rather than to a page that does not exist.

Prices and availability are what Keepa reported on the date this page was updated; both move.

Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.

What we like, and what we don't

Strengths

  • Publishes the centre distance, the inlet and outlet sizes, the detent and the full output range — four figures at the lowest price here
  • A 20 to 50 °C range, which tells you what the tap will actually deliver rather than only where it clicks
  • Names solid brass under an electroplated chrome finish

Compromises

  • No minimum operating pressure, which is what decides whether a thermostat holds temperature at all
  • The cartridge is named but not typed, and it is the part that fails on a thermostat
  • No warranty term stated, unlike the German-made mixers in this hub

Specifications

Centre distance150 mm between the hot and cold inlets — stated
Minimum operating pressureNot stated by the maker
Temperature stop38 °C detent, within a stated output range of 20 to 50 °C
CartridgeThermostatic cartridge — stated; type and diameter not given
OutletsOne outlet at G 1/2 — stated
FinishChrome over high-precision solid brass, electroplated — stated
Amazon referenceB0CS3478WD (same reference on 4 Amazon marketplaces)
EAN6902210526322

Questions people actually ask

Why is the minimum operating pressure the missing figure?

A thermostatic cartridge balances hot against cold, and below a certain pressure it cannot. On a gravity-fed system a thermostat that needs 1 bar will run cold or hunt. Almost nothing on this shelf publishes it, including this one.

What does the 20 to 50 °C range tell me?

What the tap will deliver at either end — a cool rinse and a hot shower. It is a more useful statement than the detent alone, because the detent only says where the handle clicks.