Where the power comes from is the whole question · review
The only sensor tap here that publishes its run-on time — selectable at 10, 20 or 30 seconds — alongside its battery type and its working height.
The bottom line The most precisely specified electronic tap in the catalogue — a named cell and a settable run-on — and one that only mixes if something upstream does it for you.
An electronic infrared basin mixer with a stated 100 mm clearance under the spout, a 6 V lithium CR-P2 battery, a run time selectable at 10, 20 or 30 seconds, and a single G3/8 connection at DN15.
Run-on time, selectable at 10, 20 or 30 seconds. Across every sensor tap in this catalogue, this is the only published figure for how long the water keeps flowing after your hands leave. It decides whether the tap suits a quick hand wash or filling a cup.
One inlet. Either cold, or water pre-mixed by a central thermostat upstream. That is stated plainly, and it means this tap does not mix: in an ordinary bathroom without a central thermostatic supply, it is a cold-water tap.
A 6 V lithium CR-P2 — a stocked cell rather than a proprietary pack. Naming it means a replacement can be found in ten years.
Sensing range and battery life, as everywhere on this shelf. And no waste is supplied.
On sale from 148 € to 175 € on the German, French, Italian and Spanish Amazon stores at the time of checking.
Also on sale on the British Amazon store, in the local currency: the range above is measured on the euro stores only.
Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.
| Power source | 6 V lithium CR-P2 battery — stated |
|---|---|
| Stated battery life | Not stated by the maker |
| Sensing range | Not stated by the maker |
| Run-on time | Selectable at 10, 20 or 30 seconds — stated |
| Temperature adjustment | One connection: cold water, or water pre-mixed by a central thermostat — stated |
| Tap hole diameter | Not stated by the maker — a G3/8 connection at DN15 is stated |
| Amazon reference | B098JRNRNZ (same reference on 5 Amazon marketplaces) |
| EAN | 4059625353356 |
It is how long the tap keeps flowing after your hands leave. Ten seconds suits a quick hand wash; thirty suits filling something. Being able to set it is the difference between a tap that suits the room and one that does not, and it is published nowhere else here.
Not at the tap. It has one connection, and the maker states it takes either cold water or water already mixed by a central thermostat. In an ordinary bathroom without that, it is a cold tap.
Sensor tap · internal battery — stated · single supply, hot OR cold — stated · brass · 3/8 in connection
A battery sensor tap that states plainly what most of this shelf leaves you to discover: one hose, one supply, no mixing at all.
Best for: A cloakroom or a guest basin used for washing hands briefly, where mixing was never part of the plan.
≈ 82 €
Sensor tap · 4 × AA required, not supplied — stated · adjustable temperature — stated · solenoid valve · chrome
An electronic basin tap with mini buttons for temperature and a solenoid valve, powered by four AA cells the maker states are not included.
Best for: A basin where touchless operation and a chosen temperature are both wanted, and no socket exists.
≈ 85 €
Sensor tap · adjustable temperature limiter — stated · quick-fit system · chrome · successor model noted by the maker
A touchless tap with an adjustable temperature limiter — the specification that decides whether a sensor tap suits a bathroom rather than only a cloakroom — from a range the maker states has a successor.
Best for: A bathroom basin where touchless operation is wanted and cold-only would not be acceptable.
≈ £165 / 159 €
