Size is a claim about your pressure, not about luxury · review
A 20 cm round stainless head with an air-injected pattern and TPE nozzles, at the price of a takeaway — and without a single flow figure.
The bottom line The straightforward 20 cm round replacement. It states the technology that matters and none of the numbers.
A round electroplated stainless rain head of 20 cm diameter with an air-injected pattern, a built-in 360° ball joint, TPE outlets and a G1/2 thread.
20 cm is a modest face. Air drawn into the stream makes each drop larger and softer, so a modest flow lands like a full one. That is a genuine reason to prefer this over a plain head of the same diameter.
Any flow figure, at any pressure. Two heads in this hub publish theirs; this one does not. On a head that will replace whatever you have now, that means you cannot tell in advance whether the shower gets stronger or weaker.
TPE — a flexible plastic, stated as easy to wipe and slow to block. It does the same job as the silicone nozzles named elsewhere in this hub, and it is worth knowing they are not the same material.
On sale from 20 € to 25 € on the German, French and Spanish Amazon stores at the time of checking.
Also on sale on the British Amazon store, in the local currency: the range above is measured on the euro stores only.
The Italian Amazon listing is priced above 1.6× the cheapest store, which is normally a reshipping offer rather than a local price; it is left out of the range above.
Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.
| Face size | 20 cm diameter, published by the maker also as 8 inch — stated |
|---|---|
| Face shape | Round — stated |
| Thread | G1/2, stated as fitting most standard shower arms |
| Flow rate | Not stated by the maker |
| Spray pattern | One — an air-injected rain pattern; no mode switching is stated |
| Cleanable nozzles | TPE outlets, stated as easy to clean and slow to block |
| Amazon reference | B09QLX7TF5 (same reference on 5 Amazon marketplaces) |
| EAN | 0761426883997 |
It draws air into the stream so each drop is bigger and softer, which makes a given flow feel fuller. It is the standard way of making a water-saving head feel like a generous one, and it is the right claim for a head this size.
If your existing head unscrews by hand from a threaded arm, yes — G1/2 is the near-universal standard, and this head states it.
Rain head · 20 × 20 cm square (8 in) · stainless · G1/2 female · 360° rotation and 15° tilt · 100 silicone nozzles
A 20 cm square stainless head that publishes its nozzle count and its tilt angle — two small facts nobody else on this page bothers to give.
Best for: A modern square-fitting bathroom in a hard-water area, where the nozzles need to be wiped rather than soaked.
≈ £27 / 20 €
Rain head · 30 × 20 cm rectangular · 304 stainless and ABS · G1/2 · 360° ball joint · silicone nozzles
The widest face in this hub for the lowest price — and a listing that calls a 30 × 20 cm rectangle square, which is worth noticing before you order.
Best for: A large enclosure on strong mains pressure, where face area is the point and the exact shape needs checking first.
≈ 17 €
Rain head · 28 cm round (11 in) · self-cleaning rod mechanism · brass nut and brass ball joint · G1/2
The only head in this catalogue with a moving self-cleaning mechanism: a rod that rises with the water and pushes deposits out when you turn it off.
Best for: A hard-water household tired of wiping nozzles, on a supply strong enough to fill 28 cm.
≈ £29 / 29 €
