150 mm between the centres, or nothing fits · review
A complete bath and shower set in stated 59 brass, with a three-mode hand shower on a 150 cm hose and a wall bracket you can fix at any height.
The bottom line The complete bath-and-shower set at the entry price, with its alloy named and its hose measured. Measure your wall centres before ordering.
A chrome-plated bath mixer set in stated 59 brass, with a knob diverter, a three-mode hand shower, a 150 cm hose, an adjustable wall bracket and 1/2 in DIN connections.
150 cm of hose. Enough to reach the whole body from a bath-side bracket. Short hoses are the commonest complaint about sets like this, and this one publishes its length.
A bracket fixed at any height. Which means the shower can be set for the person using it rather than for the drill hole that happened to be there.
59 brass, throughout. Not just “chrome finish”. On a bath mixer, the diverter is a moving seal under pressure and the body takes wall connections — both are places where a cast zinc alloy fails and brass does not.
Your centre distance, between the middles of the two wall outlets. The maker states 1/2 in DIN connections but not the tap’s own spacing.
On sale from 61 € to 79 € on the German, French, Italian and Spanish Amazon stores at the time of checking.
Also on sale on the British Amazon store, in the local currency: the range above is measured on the euro stores only.
Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 5 September 2026. The live price is at the top of the page.
| Centre distance | Not stated as a figure — the maker states standard 1/2 in DIN connections |
|---|---|
| Mounting | Wall-mounted, with a bracket that can be fixed at any height — stated |
| Spout reach | Not stated by the maker |
| Shower diverter | A turn knob on the body switches between bath spout and hand shower — stated |
| Flow rate | Not stated by the maker |
| Finish | High-gloss mirror chrome over a 59 brass body — stated |
| Amazon reference | B09YT3ZM31 (same reference on 5 Amazon marketplaces) |
| EAN | 0730759822218 |
From a bracket beside the bath, yes — it reaches the whole body standing and sitting. From a bracket high on the wall it is comfortable; from one low down it will trail in the bath.
A brass alloy designation, reported as the maker states it. It says the body is machined brass rather than a cast zinc alloy, which is what matters where threads are cut and where a diverter turns.
Bath mixer set · cast solid brass · 2-function changeover · 3-mode head · 1.5 m stainless hose · 70 cm rail (350 + 360 mm)
A bath and shower set in cast solid brass whose rail, hose and modes are all published — including that the 70 cm rail arrives in two pieces.
Best for: A bath used daily as a shower, where a sliding rail is wanted and the wall centres are already known.
≈ 70 €
Bath mixer · wall-mounted · pull diverter · S-connections supplied · 3-year warranty stated
A single-lever bath filler that arrives with its S-connections and all its fixings, with a pull diverter for the shower and a three-year warranty from a named German address.
Best for: A straightforward replacement on existing wall connections, where the fittings should all arrive in one box.
≈ £18 / 32 €
Thermostatic bath mixer · 150 mm ±12 centres · up to 20 l/min at 3 bar · SafetyStop 40 °C · G1/2 DN15 · two outlets
The only tap in this whole catalogue that publishes a flow rate WITH the pressure it was measured at — 20 l/min at 3 bar — alongside a centre distance and a tolerance.
Best for: A bath that has to fill quickly, on existing wall connections that may not be exactly 150 mm apart.
≈ £183 / 148 €
