The height is set by your bowl, not by taste · review
A stainless steel tall vessel faucet that publishes every dimension — 11.9 in tall, 9.6 in spout height, 5.9 in reach, hole and deck limits — with cUPC and NSF 61 stated.
A vessel faucet is the one bathroom faucet bought on arithmetic. Bowl height plus clearance gives the spout height you need; the counter decides the hole and deck limits. This page gives all of them: 11.9 inches overall, 9.6 inches of spout height, 5.9 inches of reach, a hole of 1.26 to 1.57 inches and a deck no thicker than 1.37 inches.
A 9.6-inch spout leaves about four and a half inches of working space over a 5-inch bowl, which makes it a faucet for a tall vessel.
cUPC and NSF/ANSI 61 are the two listings an American plumbing inspector looks for on a faucet. gotonovo states both, which the KRAUS and the hansgrohe on this shelf do not spell out on their pages.
The aerator is rated 2.2 gpm; a 1.2 gpm restrictor sits behind it. Take the restrictor out on a weak supply and the faucet flows more. Leave it in and it behaves like a WaterSense faucet. The spec table’s 1.18 gpm reflects the restrictor in place.
The body is stainless; the black is paint over it. Matte black shows the white of dried hard water, and the finish is the part that will wear first.
Available at around $53.19 on Amazon.com when we checked on October 29, 2026, for delivery to a US address.
Stock and prices on Amazon.com move without notice; the button above opens the live listing.
Prices quoted in this text were read on October 29, 2026. The live price is at the top of the page.
| Overall height | 11.9 in — stated |
|---|---|
| Spout height above the faucet hole | 9.6 in — stated in the bullets |
| Spout reach | 5.9 in — stated |
| Flow rate | A 2.2 gpm aerator fitted with a 1.2 gpm flow restrictor, both stated; the spec table lists 1.18 gpm |
| Cartridge | Ceramic cartridge, stated tested to 500,000 cycles |
| Finish | Matte black over SUS304 stainless steel |
| Faucet hole diameter | 1.26 to 1.57 in, with a maximum deck thickness of 1.37 in — stated |
| Certifications | cUPC, NSF/ANSI/CAN 61, DOE and CEC — stated |
| Supply hoses | 24 in cUPC hoses, 3/8 in female thread × M10 male; 1/2 in adapters available on request |
| Warranty | 5 years — stated |
| Amazon reference | B095Y33Z1R |
The aerator is rated 2.2 gpm, the federal maximum, and a 1.2 gpm restrictor is fitted behind it to save water. gotonovo presents the restrictor as removable for low-pressure homes. With it in, expect about 1.2 gpm; with it out, more flow and the WaterSense-level saving gone.
The page gives a hole range of 1.26 to 1.57 inches and a maximum deck thickness of 1.37 inches. The standard American faucet hole is 1-3/8 inches, inside that range. Measure a stone counter's thickness before ordering.
Yes: the hose ends are 3/8-inch female, which is the standard American compression stop outlet. The other end screws into the faucet on an M10 thread. Half-inch adapters are offered on request for older valves.
Same category, nearby prices, between bathroom fittings. What remains is the specifications every one publishes — half empty, a column is no use.
| Model | Price | Overall height | Spout height above the faucet hole | Spout reach | Flow rate |
|---|---|---|---|---|---|
| gotonovo tall vessel faucet, matte black | $53 | 11.9 in — stated | 9.6 in — stated in the bullets | 5.9 in — stated | A 2.2 gpm aerator fitted with a 1.2 gpm flow restrictor, both stated; the spec table lists 1.18 gpm |
| hansgrohe Logis Fine 240 vessel faucet | $157 | Not stated separately; the spec table gives a 12 in spout height | 12 in in the spec table; hansgrohe names the clearance ComfortZone 240, a 240 mm (9.45 in) zone between spout and sink | 9 in — stated in the spec table, a gooseneck high-arc spout | 1.2 gpm maximum, held by EcoRight even when the water pressure varies — stated |
| KRAUS Arlo tall vessel faucet | $180 | 12-1/8 in — stated | 8.13 in in the spec table | 5.13 in in the spec table | 1.2 gpm — stated, through an aerator with improved lime protection |
This model is listed on Amazon.com, at ≈ $53 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on October 29, 2026.
A tall vessel bowl on a budget, where knowing the exact spout height and hole size matters more than the badge
Specifications: the manufacturer sheet for bathroom fittings and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Single hole · ComfortZone 240 for vessel sinks · 12 in spout height, 9 in reach · 1.2 gpm EcoRight · AirPower aerator · 3/8 in hoses · chrome
hansgrohe's US-market tall faucet for vessel sinks: a 240 mm ComfortZone, 1.2 gpm held constant by EcoRight, an AirPower aerator and 3/8-inch hoses.
Best for: A vessel sink with a rim up to about seven inches, in a hard-water area, where parts availability matters
≈ $157
Single hole · 12-1/8 in tall · solid brass · 1.2 gpm aerator · pop-up drain for 1.75 in openings · brushed gold · lifetime limited warranty
A solid brass tall vessel faucet, 12-1/8 inches high, at 1.2 gpm, with a matching pop-up drain for a 1.75-inch opening and a lifetime limited warranty.
Best for: A vessel sink of medium height where a brass body and a matching drain are worth paying for
≈ $180
8 settings incl. 2-mode power wash · anti-clog nozzles · 72 in stainless hose · overhead and low wall brackets · 1.8 gpm · ABS · chrome
A handheld shower with eight settings, two of them a fan-shaped power wash for tub and tile, a 72-inch hose and a second low bracket — 1.8 gpm, in chrome ABS.
Best for: A shared bathroom where the shower also cleans the tub, rinses a dog or serves someone seated
≈ $30
