Two budget pull-downs, near twins on paper
Five years of warranty, or the clearer install figures?
These are the two cheapest pull-down faucets on this site, and on paper they are close: 304 stainless steel, cUPC and NSF 61, 1.8 gpm, a 360° swivel and a pause button on the spray head. They separate on hose length, warranty and how much each tells you before you install it.
| Compared on | high-arc pull-down kitchen faucet | FF0023C pull-down kitchen faucet |
|---|---|---|
| Price on Amazon.com, Oct 29, 2026 | About $49.99 | About $39.98 |
| Body | 0.06 in 304 stainless steel | SUS304 stainless steel |
| Certifications | cUPC, NSF 61, CEC | cUPC, NSF/ANSI/CAN 61 |
| Spray modes | Stream, spray, pause | Stream, spray, pause |
| Hose length | 20 in | 18 in |
| Install limits published | Hole 1.38 in, overall height 15.7 in | Hole 1.30–1.38 in, max deck 1.5 in, spout height 6.69 in, overall 14.76 in |
| Cartridge | Ceramic | Ceramic, tested to 500,000+ cycles |
| Warranty | 5 years | 2 years |
| Listed on amazon.com | Yes | Yes |
A tick marks the better answer on that line only. Counting ticks does not decide the page — the two verdicts below do, because these products answer different questions.
Take the WEWE if you want the longer hose and five years of warranty for ten dollars more. Its spec table repeats 8.5 inches for spout height and reach, so measure your clearance against the 15.7-inch overall height.
Take the FORIOUS if you want to check the fit before ordering: hole range, deck limit, spout and overall height are all published, along with a 500,000-cycle cartridge, at about $40.
Not as far as the pages show: different makers, different hose lengths, different warranties and different spec tables. They share a common budget recipe, 304 stainless, cUPC, NSF 61, 1.8 gpm and a pause mode.
Both come with deck plates for 1 or 3 holes and pre-attached supply lines. WEWE notes that half-inch adapters are not included, for older valves that need them.
1 or 3 holes · 20 in pull-down hose · 3 modes (stream, spray, pause) · 360° swivel · 1.8 gpm · 304 stainless body · cUPC, NSF 61 · 5-year warranty
A budget pull-down faucet that documents itself well: 304 stainless body, ceramic cartridge, cUPC and NSF 61, 20 inches of hose and a five-year warranty.
Best for: A first pull-down faucet on a budget, on a standard single-hole or 3-hole kitchen sink
≈ $50
1 or 3 holes, 10 in deck plate · 18 in hose · stream, spray, pause · 360° swivel · 1.8 gpm · SUS304 · cUPC, NSF 61 · 500,000-cycle cartridge
The cheapest pull-down faucet on this shelf, and the one that publishes its install limits: 6.69 in spout height, a 1.30–1.38 in hole and a 1.5 in maximum deck.
Best for: Replacing a kitchen or utility faucet at the lowest cost, where the install figures need to be checked in advance
≈ $40
Prices quoted in these summaries are dated readings. The live price is shown next to each product.
