Two faucets for a 4-inch, 3-hole sink
Two handles and a drain, or one lever and a lower flow?
Both fit the most common older American vanity sink: three holes on 4-inch centers. Kohler keeps the traditional two handles and puts the drain in the box; Moen puts a single lever on the same footprint, with a lower flow and a shorter reach.
| Compared on | Willamette 4 in centerset faucet | Chateau L4625 low-arc faucet |
|---|---|---|
| Price on Amazon.com, Oct 29, 2026 | About $76.00 | About $97.62 |
| Handles | Two levers, ceramic handles | One lever |
| Flow rate | 1.5 gpm | 1.2 gpm, WaterSense |
| Spout reach | 5.32 in | 4.36 in |
| Drain | Included, with 1-1/4 in tailpiece | Not listed |
| Maximum deck thickness | 1.625 in | Not stated |
| Warranty | Not stated on the listing | Limited lifetime |
| Shipping | No restriction stated | Cannot ship to California or Vermont |
| Listed on amazon.com | Yes | Yes |
A tick marks the better answer on that line only. Counting ticks does not decide the page — the two verdicts below do, because these products answer different questions.
Take the Kohler for a straight two-handle replacement with every dimension published and the drain in the box, at the lower price.
Take the Moen if you want single-lever mixing on a 3-hole sink, a lower flow and a lifetime warranty, and you do not live in California or Vermont.
Three holes, with the two outer ones 4 inches apart center to center. Measure yours; an 8-inch spread needs a widespread faucet such as the Pfister Courant on this site.
The listing states the restriction without a reason. Both states have their own lead-content laws for plumbing fittings, and sellers often block shipping unless a listing documents compliance.
4 in centerset · 2 lever handles · 1.5 gpm · ceramic disk valves · drain included · vibrant brushed nickel
A two-handle 4-inch centerset bathroom faucet from Kohler at 1.5 gpm, with ceramic disk valves, a drain and its tailpiece in the box.
Best for: Replacing an old two-handle faucet on a standard three-hole sink drilled at 4 inches
≈ $76
Centerset, 3-hole · 1 lever handle · low arc, 4.36 in reach · 1.2 gpm WaterSense · ADA · chrome
Moen's long-running Chateau one-handle centerset faucet: low arc, 4.36 inches of reach, 1.2 gpm WaterSense, ADA compliant, limited lifetime warranty.
Best for: A small 3-hole vanity sink where one lever and a low profile suit the space
≈ $98
Prices quoted in these summaries are dated readings. The live price is shown next to each product.
