Skip to content

The part that is actually running, not the whole tank · review

Mansfield 210 flush valve review

A Mansfield 210 flush valve with instant shut-off, stated not to rust or corrode.

By

What the maker puts in writing

  • Instant shut-off
  • Won’t rust or corrode
  • Flush valve
  • Package Dimensions: 6.0” L x 6.0” W x 13.0” H

That is the complete list. Four bullets, of which one is the product category and one is the size of the box.

The description that follows is about dream bathrooms and coordinating suites, and contains no specification at all.

And yet this may well be the right part

Here is why, and it is on a different listing.

The Danco HydroRight converter, two products along on this shelf, carries this in its compatibility bullet:

“Will NOT FIT Mansfield toilets and is not compatible”

That is not a swipe. It is an engineering fact. Most American toilets use a rubber flapper hinged over a 2 or 3 inch opening. Mansfield does not — which is why universal parts exclude them, and why a Mansfield owner cannot shop from the rest of this shelf.

So the question every other listing here agonizes over — will it fit? — is answered for this one by the name on the tank.

Instant shut-off, which is the one claim on the page

And it is the relevant one.

A tower-type valve lifts its seal straight up and drops it straight back down, rather than hinging it over an opening like a flapper. The behavior that matters is whether it reseats cleanly, because a valve that drifts shut leaves the toilet trickling.

Instant shut-off is what a Mansfield owner is buying.

What should be on this page and is not

The seal material. This is the part that fails, always, and it fails because chlorine and chloramine in tank water harden it. Five of the ten listings on this shelf name a seal material, four of them with a chemical-resistance claim: Korky’s chlorine-resistant rubber, Fluidmaster’s silicone, Danco’s Perma fit silicone, Zurn’s chloramine-resistant seals, Sloan’s natural rubber.

Mansfield says won’t rust or corrode, which addresses metal and not rubber.

A warranty. Fluidmaster publishes ten years on one product here and five on two others. Zurn publishes three. Mansfield publishes none.

And the compatible models. “Fits Mansfield toilets” would have cost nothing to print, along with which ones.

Seventeen dollars seventy-eight

Which, as it happens, is less than the $26.49 universal converter that cannot fit your toilet.

Buy it because it is the maker’s own part. Not because the page told you anything.

Availability

Available at around $16.46 on Amazon.com when we checked on October 29, 2026, for delivery to a US address.

Stock and prices on Amazon.com move without notice; the button above opens the live listing.

Prices quoted in this text were read on October 29, 2026. The live price is at the top of the page.

Strengths, and the catches

Strengths

  • It is the maker’s own part for a Mansfield toilet, which matters because Mansfield flush valves are not the industry-standard design
  • "Instant shut-off" describes the one behavior a Mansfield tower valve is bought for
  • Seventeen dollars seventy-eight, which is less than the universal converter on this shelf that will not fit a Mansfield anyway

Compromises

  • Four bullets, and two of them are the product category and the carton size: no valve size, no GPF, no material, no compatible models
  • No seal material and no chlorine resistance published, on a part whose seal is the thing that fails
  • No warranty published, where Fluidmaster warrants all three of its products on this shelf

Specifications

Valve typeA flush valve with an instant shut-off, stated not to rust or corrode. THAT IS THE WHOLE OF WHAT THE MAKER PUBLISHES: four bullets, one of which is the words « Flush valve » and another the carton size. Neither the material nor the seal material nor the chlorine resistance is published.
Tank opening diameterNOT PUBLISHED by the maker, and neither are the compatible models — so nothing on this listing tells you whether it fits your tank.
Adjustable height rangeNOT PUBLISHED by the maker.
Inlet connectionNOT PUBLISHED, and the installation is not described on this listing either.
Inlet positionNOT PUBLISHED.
Stated flush volumesNO GPF RANGE IS PUBLISHED. 7.1 oz (200 g), 5 × 5 × 12 in (127 × 127 × 305 mm), in a 6.0 × 6.0 × 13.0 in carton, and no warranty is published.
Amazon referenceB00103WVWG
EAN0046224734178

The questions we get

Why can’t I use a universal flush valve on a Mansfield toilet?

Because Mansfield does not use the industry-standard flapper arrangement. Most American toilets have a rubber flapper hinged over a 2 or 3 inch opening; Mansfield uses a different design, which is why the Danco HydroRight converter on this shelf carries the warning "Will NOT FIT Mansfield toilets and is not compatible" in its own compatibility bullet. That exclusion is the most useful piece of information about this listing, and it sits two products away. If you have a Mansfield, the maker’s part is not merely the easy option — it is the option.

What does "instant shut-off" mean?

That the valve closes cleanly at the end of the flush rather than drifting shut. On a tower-type valve the seal lifts straight up and drops straight back onto its seat, which is a different action from a flapper hinging over an opening — and the complaint it answers is the valve that does not reseat properly and leaves the toilet trickling. It is the behavior a Mansfield owner is buying, and it is the only functional claim on this page.

Should the thin page worry me?

Less than it would on any other listing here, and this is worth being fair about. Several of the ten products on this shelf publish an explicit compatibility restriction, because a flush valve either fits your toilet or it is worthless — and the pages that publish the most, like the Kohler, publish it precisely to narrow themselves to one model. This page publishes no size, no GPF, no material and no model list, which is genuinely poor. But for a Mansfield owner the question "will this fit?" is already answered by the brand name on the tank. What is missing and would matter is the seal material and a warranty: the seal is what fails, and Fluidmaster warrants its parts for five and ten years.

Against the closest bathroom fittings on price

Same category, nearby prices, between bathroom fittings. What remains is the specifications every one publishes — half empty, a column is no use.

Model Price Valve typeTank opening diameterAdjustable height rangeInlet connection
Mansfield 210 flush valve $16 A flush valve with an instant shut-off, stated not to rust or corrode. THAT IS THE WHOLE OF WHAT THE MAKER PUBLISHES: four bullets, one of which is the words « Flush valve » and another the carton size. Neither the material nor the seal material nor the chlorine resistance is published.NOT PUBLISHED by the maker, and neither are the compatible models — so nothing on this listing tells you whether it fits your tank.NOT PUBLISHED by the maker.NOT PUBLISHED, and the installation is not described on this listing either.
Fluidmaster 5403 3 in toilet flapper $17 A drop-in kit replacing the FLAPPER, THE CHAIN AND THE HANDLE together, on a Perma fit silicone seal stated chemical resistant, stated not to warp and stated to last ten times longer than a regular flapper. 3 in, and the maker states it will NOT fit 2 in valves, nor Mansfield toilets.3 in.NOT PUBLISHED. What the listing gives instead is a CLEARANCE: 10 in minimum from the top of the flush valve opening to the inside of the tank lid.NONE — the kit sits on the outlet. Installation is drop-in, no tools, under 20 minutes, with no tank removal.
Fluidmaster 555C PerforMAX flush valve kit $12 A PerforMAX adjustable water-saving FLAPPER, with a dial that sets the flush volume — not a complete valve. It fits most 2 in flush valve toilets, from 1.28 GPF high-efficiency to 3.5 GPF, and NOT 3 in valves. Not dual flush.2 in.NOT APPLICABLE — a flapper has no height to set. What adjusts here is the flush volume, on the dial.NONE — a flapper sits on the outlet, not the inlet. Installation is peel and stick, with no glue, no tools stated and no tank removal.
Korky 3060BP 3 in toilet flapper $12 A FLAPPER ONLY — not a valve and not a kit — in chlorine-resistant rubber on a stainless steel chain. It fits a 3 in opening and NOT a 2 in one. Three published bullets, one of which is that Lavelle Industries launched the first toilet flapper over fifty years ago.3 in.NOT PUBLISHED, and no dial or flush-volume adjustment is claimed anywhere.NONE — a flapper sits on the outlet. Installation is not described on this listing, and a flapper needs no tank removal.

Where the models diverge, in bathroom fittings

  • If price decides: Fluidmaster 555C PerforMAX flush valve kit, at $12.

The price on Amazon.com

This model is listed on Amazon.com, at ≈ $16 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.

Details checked on October 29, 2026.

Who buys this one, among bathroom fittings

A Mansfield toilet, where the alternatives on this shelf do not fit and the maker’s own part is the answer

What buyers actually choose

Amazon reports what buyers took in the month before this page was last checked: at least 100.

The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.

Sources

Specifications: the manufacturer sheet for bathroom fittings and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.

How we assess these bathroom fittings

Also on your shortlist, probably

  • Toilet flush valves and fill valves

    Danco HydroRight dual flush converter

    HydroRight water-saving dual flush valve with push-button handle in plastic and chrome, converting most standard toilets into a dual-flush toilet using up to 70% less water for liquids and paper, and replacing a worn flapper, chain and handle in one part; fitting 1.6 to 3.5+ gallon per flush standard 2-piece toilets with a 2 in flush valve and requiring a 10 inch minimum clearance from the highest point of the flush valve opening to the inside of the tank lid, and stated not to fit Mansfield toilets; drop-in installation without tools in under 20 minutes with no tank removal; a chemical-resistant Perma fit silicone seal stated not to warp; the maker states a family of four saves more than 15,000 gallons a year and that the reduced flush is the setting needed four times out of five

    A dual-flush conversion valve with a two-button handle, fitting 2 in valve two-piece toilets without tools.

    Best for: An older 1.6 to 3.5 GPF toilet with a 2 in valve, where halving the water is worth twenty minutes

    ≈ $26

    Check price on Amazon Read the review: Danco HydroRight dual flush converter
  • Toilet flush valves and fill valves

    Fluidmaster 555C PerforMAX flush valve kit

    Universal PerforMAX 2 in toilet flush valve repair kit with a peel-and-stick design eliminating glue and requiring no tank removal, including the PerforMAX adjustable water-saving flapper whose dial controls flush volume; a 2 in flush valve replacement kit suitable from 1.28 gallon high-efficiency designs to older 3.5 gallon per flush toilets, built from corrosion-resistant materials with a 5 year warranty per the maker description; the listing states a limit of one per order and that returns will not be honoured on this closeout item

    A universal 2 in flush valve repair kit with a peel-and-stick seal and an adjustable PerforMAX flapper.

    Best for: A leaking two-inch flush valve, measured first — the cheapest complete repair on this shelf

    ≈ $12

    Check price on Amazon Read the review: Fluidmaster 555C PerforMAX flush valve kit

All toilet flush valves and fill valves compared